Call us (Toll Free): AUS: 1300 506 505 NZ: 0800 944 788
Connect with us:
0

TCC-SJD

Double ball joint

for TCC connecting clamps, technopolymer

TCC-SJD

Double ball joint
Double ball joint

TCC-SJD

Double ball joint
Double ball joint

Material

Glass-fibre reinforced polyamide based (PA) technopolymer, RAL 9005 (C9) black colour or grey RAL 7040 (C33) colour, matte finish.

Features and applications

The double ball joint is designed to be mounted on TCC clamps.

Two bushings with spherical seats must be used for each double joint TCC-SJA, not included in the supply.

Technical data

The resistance values shown in the table were measured during laboratory tests at ambient temperature with the screws tightened to the recommended torque of 5 Nm.

Each ball joint can be freely rotated and tilted to a maximum of +/-30 degrees.

Assembly instructions (fig. 1)

  • Force the ball joint into one end of the bushing and repeat the same operation for the other joint.
  • After loosening the clamping screws, insert the sleeves into them until they snap in.
  • Turn the joints to the desired position.
  • Tighten the screws of the clamps.

We recommend loosening the clamping screws when it is necessary to change the position of the joints.

 

LOOKING FOR ALUMINIUM PROFILES:

Feeling overwhelmed with what product to choose?

Don’t delay, give OIC a call and talk to us about your industrial application. Our aim is to help your business choose the right Elesa+Ganter element for the function you need. Whether you need to clamp, close, connect, control, level, manoeuvre, measure or set. OIC has an Elesa+Ganter machine element to fit your need.

We want to find out about your industrial application need and where we can help. Our contact details are below.

CONTACT US