GN 875


  • Type L: swiveling left
  • Type R: swiveling right


  • Type A: Clamping arm with slotted hole and 2 flanged washers
  • Type AC: Clamping arm with slotted hole, 2 flanged washers and GN 708.1 spindle assembly
  • Type B: Clamping arm with threaded hole
  • Type F: Adapter flange
  • Type N: without clamping arm


hard anodized

wear-resistant surface

Double-action air cylinder

max. pressure 6 bar

Socket cap screw DIN 912

Steel, zinc plated, blue passivated

Washer ISO 7092

Steel, zinc plated, blue passivated

  • Spindle assembly GN 708.1 type A
  • Steel, zinc plated
  • Rubber tip 85 Shore A

Swing clamps GN 875 are used when the clamping point for inserting and removing the workpiece must be freely accessible on top.

During the clamping action, the arm is first swiveled by 90° and lowered, followed by the linear tensioning motion. The workpiece clamping must take place within the clamping stroke.

The angle orientation of the tensioning arm can be set arbitrarily during mounting on the swing clamp. When tightening the screw, the piston rod must not experience any torque. The clamping arm must therefore be held to prevent twisting.

The swing clamps are equipped with a magnet ring piston and are therefore pre-fitted for end stop detection via sensor.

  • Clamping arms GN 875.2 
  • Clamping arms GN 875.3 
  • Adapter flanges GN 875.4 
  • Toggle clamp spindle assemblies GN 708.1 


Feeling overwhelmed with what product to choose?

Don’t delay, give OIC a call and talk to us about your industrial application. Our aim is to help your business choose the right Elesa+Ganter element for the function you need. Whether you need to clamp, close, connect, control, level, manoeuvre, measure or set. OIC has an Elesa+Ganter machine element to fit your need.

We want to find out about your industrial application need and where we can help. Our contact details are below.