Call us (Toll Free): AUS: 1300 506 505 NZ: 0800 944 788
Connect with us:
0

GN 875

Coding

  • Type L: Swiveling left
  • Type R: Swiveling right

Types

  • Type A: Clamping arm with slotted hole and 2 flanged washers
  • Type AC: Clamping arm with slotted hole, 2 flanged washers and spindle assembly
  • Type B: Clamping arm with threaded hole
  • Type F: Adapter flange
  • Type N: Without clamping arm

Aluminum

Hard anodized

Wear-resistant surface

Double-action air cylinder

Max. pressure 6 bar

Socket cap screw DIN 912

Steel, zinc plated, blue passivated

Washer ISO 7092

Steel, zinc plated, blue passivated

  • Clamping screw type A
  • Steel, zinc plated, blue passivated
  • Rubber thrust pad 85 Shore A

Swing clamps GN 875 are used when the clamping point for inserting and removing the workpiece must be freely accessible on top.

During the clamping action, the arm is first swiveled by 90° and lowered, followed by the linear tensioning motion. The workpiece clamping must take place within the clamping stroke.

The angle orientation of the tensioning arm can be set arbitrarily during mounting on the swing clamp. When tightening the screw, the piston rod must not experience any torque. The clamping arm must therefore be held to prevent twisting.

The swing clamps are equipped with a magnet ring piston and are therefore pre-fitted for end stop detection via sensor.

  • Clamping Arms GN 875.2 
  • Clamping Arms GN 875.3 
  • Adapter Flanges GN 875.4 
  • Sensor GN 3380 
  • Clamping Screws GN 708.1 

  • List of Pneumatic Clamps 

 
Sized1d6d7d8 H7l3l4l5l6m4m5m6m7t2t3t4t5 ≈
16M 5M 54.5-211126-3151211315--4.7
20M 6M 55.5-11.51724-3644.5222020--5
25M 8M 6-6171733484044.530201510104.5
32M 8M 6-618184055455130302015156
40M 8M 8-621214055525230372015157.5
50M 10M 8-826264060665340462020156
63M 10M 8-830304060805340602020157.5

LOOKING FOR SOMETHING:

Feeling overwhelmed with what product to choose?

Don’t delay, give OIC a call and talk to us about your industrial application. Our aim is to help your business choose the right Elesa+Ganter element for the function you need. Whether you need to clamp, close, connect, control, level, manoeuvre, measure or set. OIC has an Elesa+Ganter machine element to fit your need.

We want to find out about your industrial application need and where we can help. Our contact details are below.

CONTACT US