Call us (Toll Free): AUS: 1300 506 505 NZ: 0800 944 788
Connect with us:
0

GN 722.4

Types

  • Type A: Square, with pull ring, mounted
  • Type AU: Square, with pull ring, unmounted
  • Type R: Round, with pull ring, mounted
  • Type RU: Round, with pull ring, unmounted
  • Type C: Square, with pull ring, mounted (riveted)
  • Type CU: Square, with pull ring, unmounted
  • Type T: Round, with pull ring, mounted (riveted)
  • Type TU: Round, with pull ring, unmounted
  • Type E: Square, with latch, mounted (riveted)
  • Type EU: Square, with latch, unmounted
  • Type V: Round, with latch, mounted (riveted)
  • Type VU: Round, with latch, unmounted

Guide

  • Steel precision casting ST

Weldable, blackened

  • Stainless steel precision casting AISI 316 A4

Weldable

Pull ring

  • Steel precision casting

Zinc plated, blue passivated (for ST)

  • Stainless steel precision casting AISI 316 (for A4)

Latch

  • Steel precision casting

Zinc plated, blue passivated (for ST)

  • Stainless steel precision casting AISI 316 (for A4)

Plunger pin

  • Steel, zinc plated, blue passivated (for ST)
  • Pressure spring

Stainless steel AISI 316 (for A4)

Grub Screw DIN 915 (without rest position)

Countersunk screw (with rest position)

  • Steel, zinc plated (for ST)
  • Stainless steel (for A4)

Pressure spring

Stainless steel AISI 316Ti

With indexing plungers GN 722.4, the plunger pin is actuated via the pull ring / latch. This is done either manually, with a cable or by means of an extended pull rod with hook. The ST version is designed for applications in steel construction, whereas the stainless steel version A4 is suitable for use in particularly aggressive environments.

The types with a rest position are used when the plunger pin should temporarily not protrude. For this purpose, the pull ring is turned sideways after the locking pin has been retracted. The ring is held in this position by the catch groove at the top of the guide.

The dimensional tolerances between plunger pin and guide are selected so that the functional reliability is guaranteed even after welding, applying a corrosion protection layer or in case of contamination.

For fastening by welding, the unmounted types AU / RU / CU / TU / EU / VU are particularly recommended to avoid changes to the microstructure of the material due to heating of the spring and plunger pin. In this case, the indexing plunger is assembled only after the surface treatment of the welded guide.

  • Range of Indexing Plungers 

  • Load Rating Information 
  • Stainless Steel Characteristics 

LOOKING FOR SOMETHING:

Feeling overwhelmed with what product to choose?

Don’t delay, give OIC a call and talk to us about your industrial application. Our aim is to help your business choose the right Elesa+Ganter element for the function you need. Whether you need to clamp, close, connect, control, level, manoeuvre, measure or set. OIC has an Elesa+Ganter machine element to fit your need.

We want to find out about your industrial application need and where we can help. Our contact details are below.

CONTACT US