GN 41

Types (Base plate)

  • Type B0: without rubber underlay, with 2 fixing bores
  • Type D0: blank, ground without rubber underlay
  • Type D1: blank, ground rubber, clipped on, black
  • Type D3: blank, ground rubber vulcanised, black

Version

  • Version S: without nut, External hexagon at the bottom
  • Version SK: with nut, External hexagon at the bottom
  • Version T: without nut, Wrench flat at the bottom, "not dipping" version
  • Version TK: with nut, Wrench flat at the bottom, "not dipping" version
  • Version U: without nut, Hexagon socket at the top, Wrench flat at the bottom
  • Version UK: with nut, Hexagon socket at the top, Wrench flat at the bottom
  • Version |b bb|: without nut, External hexagon at the top, Wrench flat at the bottom
  • Version VK: with nut, External hexagon at the top, Wrench flat at the bottom
  • Version W: with adjustable sleeve, Wrench flat at the bottom
  • Version X: with female thread, External hexagon

Base plate, blank ground

Stainless Steel AISI 304

Threaded stem

Stainless Steel AISI 303

Hexagon nut ISO 4032

Stainless Steel AISI 304

Rubber cap, clipped on

black, Santoprene® (TPE) 80 ≈ Shore A

Rubber underlay, vulcanised

black, Perbunan® (NBR) 70 ± Shore A

Stainless Steel-Levelling feet GN 41 are easy and very reasonably priced foot design variants.

They will be delivered mounted and are not removable.

  • Stainless Steel characteristics -
  • Elastomer characteristics 

 

Information

The static load bearing capacity given in the table rests on a test series in which the load has been applied perpendicular to the base plate. For the values given in the table, the strain relief may result in minor deformations of the base plate.

Bending and buckling stress which often occurs in practice results in a lower load bearing capacity of the adjustment spindle and may have to be taken into account.

Also, the spindle strength is assumed to be ≥ 500 N/mm2.

The details given on strength are nonbinding guide values without any liability. In general, they do not constitute a warranty of quality.

The user must determine from case to case if a product is suitable for the intended purpose or use. Environmental factors may influence the stated values.

d1d2Static load in kN----
--Versions of threaded stem----
--S / SKT / TK and U / UKV / VKWX
40M 88---8
40M 1012---12
40M 1212---12
40M 16-12--12
50M 88---8
50M 1014---14
50M 1214---14
50M 16-14--14
60M 88---8
60M 1014---14
60M 1216---16
60M 16-16161616
80M 88---8
80M 1014---14
80M 1220---20
80M 16-20202020
80M 20-20202020
80M 24-222222-

LOOKING FOR SOMETHING:

Feeling overwhelmed with what product to choose?

Don’t delay, give OIC a call and talk to us about your industrial application. Our aim is to help your business choose the right Elesa+Ganter element for the function you need. Whether you need to clamp, close, connect, control, level, manoeuvre, measure or set. OIC has an Elesa+Ganter machine element to fit your need.

We want to find out about your industrial application need and where we can help. Our contact details are below.