GN 165.1

Identification No.

No. 2: with 2 Stainless Steel-Clamping screws DIN 912


plastic coated

black, RAL 9005, textured finish SW

Clamping square not machined

Socket cap screw DIN 912

Stainless Steel AISI 304

Hexagon nuts DIN 985

Stainless Steel AISI 304

GN 165.1 linear actuator connectors are normally supplied mounted only in connection with a square linear actuator and for function control.

The square of the linear actuator connector is supplied not machined in the standard design. Together with the tolerance of the tube, this may result in a relatively large play.

This can be adjusted in one direction using the clamping screws. In the other direction (90° to it), a defined minimum play can be achieved only by appropriate machining (special design) of the square linear actuator connector.

The standard version of the clamping screw is a socket cap screw with hexagonal socket DIN 912. It can be replaced by a clamping kit  GN 911  (article code see table of dimensions).

  • Clamping kits GN 911 

  • Linear actuator connectors with little play

  • Stainless Steel characteristics 


Feeling overwhelmed with what product to choose?

Don’t delay, give OIC a call and talk to us about your industrial application. Our aim is to help your business choose the right Elesa+Ganter element for the function you need. Whether you need to clamp, close, connect, control, level, manoeuvre, measure or set. OIC has an Elesa+Ganter machine element to fit your need.

We want to find out about your industrial application need and where we can help. Our contact details are below.