CLT.

Latches for cabinets

with handle for rod controls, technopolymer

CLT.

Latches for cabinets
Latches for cabinets

CLT.

Latches for cabinets
Latches for cabinets

Handle and base

Glass-fibre reinforced polyamide based (PA) technopolymer, black colour, matte finish.

Handle shank

Zinc alloy with superficial chromate treatment and NBR synthetic rubber O-ring.

Packing rings

Silicon directly applied under the handle base and NBR synthetic rubber O-ring (only for execution IP 65).

Screws

Zinc-plated steel.

Standard executions

  • CLT.: lock with different combinations. Each lock has two nickel-plated brass keys, with different combination, removable at 180°.
  • CLTU.: lock with one combination. All locks have a couple of keys in nickel-plated brass and the same combination which can be opened with the same key, removable at 180°.
  • CLTA.: lock with two-wing groove and technopolymer key with zamac insert, supplied.

Indexes to add to the above mentioned executions:

  • IP: executions with protection plug and packing ring with IP 65 protection class, according to table EN 60529, with two zinc-plated setting screws, supplied.
  • EU: executions with European style stator.
  • EU-IP: executions with European style stator and protection plug and packing ring with IP 65 protection class, according to table EN 60529 , with two zinc-plated setting screws, supplied.

Accessories on request

CLT. latches with handle for rod controls are generally used with rod control CAR.- to be ordered separately (see Assembly drawing attached).

Other accessories available on request:

  • black technopolymer rod guides: one rod guide every 500 mm of rod control (code 421133 C.GAT);
  • 2 flat galvanised steel rod guides, section 14x3 mm, length 1.000 mm and black technopolymer edge rolls for frame 20 mm thick (code 421135 C.AT 1000-20).
  • 2 flat galvanised steel rod guides, section 14x3 mm, length 1.000 mm and black technopolymer edge rolls for frame 25 mm thick (code 421136 C.AT 1000-25).
  • Latch-type handles with lock with different groove for key.
 

LOOKING FOR ALUMINIUM PROFILES:

Feeling overwhelmed with what product to choose?

Don’t delay, give OIC a call and talk to us about your industrial application. Our aim is to help your business choose the right Elesa+Ganter element for the function you need. Whether you need to clamp, close, connect, control, level, manoeuvre, measure or set. OIC has an Elesa+Ganter machine element to fit your need.

We want to find out about your industrial application need and where we can help. Our contact details are below.