Call us (Toll Free): AUS: 1300 506 505 NZ: 0800 944 788
Connect with us:
0

GN 119

Latches

Steel / Stainless Steel

GN 119

Latches
Steel

GN 119-NI

Latches
Stainless Steel

GN 119

Latches
Steel

Types

  • Type SG: Operation with star knob
  • Type DK: Operation with triangular spindle (DK7)
  • Type VK7: Operation with square spindle A/F7
  • Type VK8: Operation with square spindle A/F8
  • Type VDE: Operation with double bit

Version in Steel

Lock housing / operating bolt

Zinc die casting, chrome plated

Cam latch

Sheet Steel zinc plated, blue passivated

Distance piece

Aluminium

Star knobs VCT. 

Plastic (Polypropylene PP)

black, matt

Version in Stainless Steel

Stainless Steel AISI 303 NI

Cam latch AISI 304

Stainless Steel-Star knob GN 5334 

AISI 304

Protection class IP 65

Latches GN 119 have a pulling-in range of 10 mm. Locking is achieved by turning the latch clockwise.

The operating bolt of the stainless steel version is fitted with an O-ring for sealing.

 
 

By turning the latch clockwise the stepped cam latch moves up behind the door frame and pulls the door in.

The large pulling-in range of the cam (10 mm) allows these locks to be used successfully on doors with sealing strips. When selecting clamping range ‚A‘ the thickness of the door seal might have to be taken into consideration.

To fit the lock, the door will have to be provided with a hole as per sketch shown at a distance from the door frame to hole center of 23 mm.

The lock housing with the preassembled operating bolt is fitted into the hole from the front and held in position with the hexagon nut. The distance piece and the cam latch are then fitted at the rear and fixed with the hexagon nut.

In volume production, the mounting borehole in the door leaf is usually made by punching or laser machining.

For small series and steel sheets below 2 mm thickness, the sheet metal punshes GN 123 are the tool of choice.

The installation bore diameter can also be set by drilling / milling as shown in the outline drawings.

LOOKING FOR ALUMINIUM PROFILES:

Feeling overwhelmed with what product to choose?

Don’t delay, give OIC a call and talk to us about your industrial application. Our aim is to help your business choose the right Elesa+Ganter element for the function you need. Whether you need to clamp, close, connect, control, level, manoeuvre, measure or set. OIC has an Elesa+Ganter machine element to fit your need.

We want to find out about your industrial application need and where we can help. Our contact details are below.

CONTACT US