Call us (Toll Free): AUS: 1300 506 505 NZ: 0800 944 788
Connect with us:
0

TP-SV+a

Push-fit breather plugs

with valve and flat dipstick, technopolymer

TP-SV-100mb+a

Push-fit breather plugs
For pressures above 0.100 bar

TP-SV-10mb+a

Push-fit breather plugs
For pressures above 0.010 bar

TP-SV-100mb+a

Push-fit breather plugs
For pressures above 0.100 bar

Cover

Polyamide based (PA) technopolymer, RAL 2004 orange, semi-matte finish, valve symbol.

Fitting

Polyamide based (PA) technopolymer, black colour, semi-matte finish.

Packing rings

Two NBR synthetic rubber O-rings.

Sealing disk

Technopolymer with NBR synthetic rubber O-ring.

Spring

Stainless steel.

Flat dipstick

Flat section phosphatised steel.

On request and for sufficient quantities dipstick can be supplied in different lengths and/or complete with MAX-MIN level lines.

Standard executions

  • TP-SV-10mb+a: valve (sealing disk) opens when pressure exceeds 0.010 bar (set at 10 mb).
  • TP-SV-100mb+a: valve (sealing disk) opens when pressure exceeds 0.100 bar (set at 100 mb).

Maximum continuous working temperature

80°C.

Features and applications

Push-fit avoids the need to screw/unscrew, allowing for quick installation. See Fig.1 for the dimensions of the assembly hole. Chamfer hole 1x45° the outside survace to make assembly easier.

TP-SV+a valve breather caps are particularly suitable for all those applications (speed reducers, variators or compressors) when the internal air pressure must not exceed a certain value (10 or 100 mb).

In these cases, the safety valve of the cap allows the expulsion of the exceeding air in the reservoir, thus re-establishing the pressure values for which the valve is set.

Sealing disc (closed in normal pressure conditions) prevents dust from getting in and oil-losses.

The product is designed to vent slight overpressures; the pressure inside the tank must not exceed 200 mb, under optimum conditions of cleanliness of the assembly hole and at room temperature.

Technical data

Air flow rate for each model can be determined from the graph calculating the difference between the pressure inside and outside the reservoir.

 
 

LOOKING FOR ALUMINIUM PROFILES:

Feeling overwhelmed with what product to choose?

Don’t delay, give OIC a call and talk to us about your industrial application. Our aim is to help your business choose the right Elesa+Ganter element for the function you need. Whether you need to clamp, close, connect, control, level, manoeuvre, measure or set. OIC has an Elesa+Ganter machine element to fit your need.

We want to find out about your industrial application need and where we can help. Our contact details are below.

CONTACT US