Call us (Toll Free): AUS: 1300 506 505 NZ: 0800 944 788
Connect with us:
0

HCK-PP

Assembly ends

Glass-fibre reinforced polypropylene based (PP) technopolymer, suitable for contact with acid or base liquids, RAL 7024 grey colour.

Produced from FDA compliant raw material (FDA CFR.21 and EU 10/2011).

Support

Aluminium in natural colour.

Transparent front protection

Polycarbonate (PC) plate. Can be removed for cleaning by levering with a screwdriver at the base of the protection to release the retaining undercut (see instructions on the plate).

Level tubular window

Borosilicate glass transparent tube.

Graduated contrast screen

White lacquered aluminium. It can be taken out before assembly to allow the insertion of level lines or words.

Screws, nuts and washers

AISI 316 stainless steel.

Packing rings

Red silicone VMQ 70ShA.

Produced from FDA compliant raw material (FDA CFR.21).

 
 

Features and performances

Thanks to the Polypropylene (PP) assembly ends, the AISI 316 stainless steel fixing screws and the silicone packing rings, the HCK-PP level indicator is highly resistant to acids, bases, and solvents. It is not resistant to aromatic hydrocarbons. Maximum fluid level visibility even from side positions.

Technical data

In laboratory tests carried out for a relatively limited time with the following liquids at a temperature of 23° C: mineral oil type CB68 (according to ISO 3498), water, or water/glycol-based solutions (50%), the resistance values were higher than 20 bar.

Maximum continuous working temperature: 80°C.

It was also found to be resistant for many hours with pressures of 5/6 bar using standard test fluids, oil, water, and solutions containing glycol.

For use with other fluids and under different pressure and temperature conditions, please contact ELESA+GANTER Technical Department.

In any case we suggest to verify the suitability of the product under the actual working conditions.

Special executions on request

  • Indicators with level visibility (see value "e") up to 1444 mm and fixing holes with hole centre distance up to 1.500 mm.

Packing rings in special material depending on the customer's needs.

LOOKING FOR SOMETHING:

Feeling overwhelmed with what product to choose?

Don’t delay, give OIC a call and talk to us about your industrial application. Our aim is to help your business choose the right Elesa+Ganter element for the function you need. Whether you need to clamp, close, connect, control, level, manoeuvre, measure or set. OIC has an Elesa+Ganter machine element to fit your need.

We want to find out about your industrial application need and where we can help. Our contact details are below.

CONTACT US