GN 962


  • Type APV: Clamping arm with slotted hole, with two flanged washers
  • Type CPV: Clamping arm with slotted hole, with two flanged washers, GN 708.1 spindle assembly
  • Type EPV: Clamping arm with bushing


Coding M: Magnetic piston


Steel, phosphate-treated

Bearing pins / bushings


hardened and ground

Double-action air cylinder

with adjustable end position damping

max. pressure 6 bar

All moving parts

lubricated with special grease

  • Spindle assembly GN 708.1,type A
  • Steel, zinc plated
  • Rubber tip 85 Shore A

Toggle clamps „Longlife“ GN 962 are equipped with a reinforced body and hardened and ground bearing pins / bushings. This makes them suitable for applications in which substantial forces arise and a long service life is required.

To ensure an extended life of the mechanical parts as well as the pneumatic cylinder, the operating pressure should not exceed 6 bar. In addition, a compressed-air control unit should be mounted in the air intake line.

Toggle clamps GN 962 are equipped with a magnetic piston as standard. This makes end position detection possible in connection with sensors GN 3380.

  • Sensor GN 3380 


Feeling overwhelmed with what product to choose?

Don’t delay, give OIC a call and talk to us about your industrial application. Our aim is to help your business choose the right Elesa+Ganter element for the function you need. Whether you need to clamp, close, connect, control, level, manoeuvre, measure or set. OIC has an Elesa+Ganter machine element to fit your need.

We want to find out about your industrial application need and where we can help. Our contact details are below.