GN 812


  • Type AV: U-bar version, with two flanged washers
  • Type CV: U-bar version, with two flanged washers and GN 708.1 spindle assembly
  • Type EV: Solid bar version, with clasp

Parts in sheet metal

Case-hardened Steel C10, zinc plated, blue passivated

Bearing pins tempered

Bearing rivets case-hardened

All moving parts

lubricated with special grease

Hand grip

High quality, oil resistant red plastic

Spindle assembly GN 708.1, Type A

  • Steel, zinc plated
  • Rubber tip 85 Shore A

GN 812 vertical acting toggle clamps work according to the toggle principle: lever and clamping bar move in the same direction. They can be mounted in two planes via the dual flanged mounting base and require less space for the clamping action because the clamping arm and the operating lever move in opposite directions.

Vertical acting toggle clamps in the U-bar version with two flanged washers (Type AV) can accommodate an application specific clamping screw. A spindle assembly with neoprene rubber tip is also included for Type CV.

Type EV version can either be utilized by welding the clasp which can then accommodate an application specific hold-down fastener component, or by utilizing the bar in conjunction with the GN 809- clamp mounts to hold the work piece in place.

  • General information for toggle clamps -

  • Spindle assemblies-
  • GN 801 clamp mounts for toggle clamps (for Type AV)
  • GN 809 clamp mounts for toggle clamps (for Type EV)


Feeling overwhelmed with what product to choose?

Don’t delay, give OIC a call and talk to us about your industrial application. Our aim is to help your business choose the right Elesa+Ganter element for the function you need. Whether you need to clamp, close, connect, control, level, manoeuvre, measure or set. OIC has an Elesa+Ganter machine element to fit your need.

We want to find out about your industrial application need and where we can help. Our contact details are below.