Call us (Toll Free): AUS: 1300 506 505 NZ: 0800 944 788
Connect with us:
0

GN 820.3

Types

  • Type BL: U-bar version, with two flanged washers
  • Type BLC: U-bar version, with two flanged washers and GN 708.1 spindle assembly
  • Type FL: Solid bar version, with clasp, for welding
  • Type VL: Clamping arm extended, with slotted hole and with two flanged washers (Version in Steel)
  • Type VLC: Clamping arm extended, with slotted hole, two flanged washers and clamping screw GN 708.1 (Version in Steel)

Version in Steel

  • Case-hardened Steel C 10, zinc plated, blue passivated
  • Bearing pins tempered
  • Bearing rivets case-hardened

All moving parts

lubricated with special grease

Hand grip

High quality, oil resistant, red plastic

Clamping screw GN 708.1, type A

Steel, zinc plated

Rubber tip hardness 85 Shore A

Version in Stainless Steel NI

Stainless Steel AISI 304

All moving parts

lubricated with special grease

Hand grip

High quality, oil resistant, red plastic

Spindle assembly GN 708.1, type A

Steel, zinc plated / Stainless Steel AISI 304

Rubber tip 85 Shore A

GN 810.4 toggle clamps are latched in both end positions. In the clamped position, this prevents unintentional opening or opening caused by vibrations; and in the open position, it prevents self-closing of the toggle clamp, such as due to an extended clamping arm. The latching can be disabled with a single hand to allow for opening / closing.

They work according to the toggle principle: lever and clamping bar move in the same direction. In the clamped position the operating lever is in its vertical position.

Vertical acting toggle clamps in the U-bar version with two flanged washers (type BL) can accommodate an application specific clamping screw. A clamping screw with neoprene rubber tip is also included for type BLC.

Type FL version can either be utilized by welding the clasp which can then accommodate an application specific hold-down fastener component, or by utilizing the bar in conjunction with the GN 809 holders for clamping screws to hold the work piece in place.

Toggle clamps in the U-bar version with two flanged washers (type VL) can accommodate an application specific clamping screw. A clamping screw with neoprene rubber tip is also included for type VLC.

  • General information for toggle clamps 

  • Stainless Steel characteristics 

  • Spindle assemblies
  • Clamping screws
  • Holders for clamping screws GN 801 (for type BL)
  • Holders for clamping screws GN 809 (for type FL)
  • Clamping arm extenders GN 801.1 (for type BL)
  • Clamping arm extenders GN 801.2 (for type FL)
  • Clamping arm extenders GN 809.1 (for type FL)

LOOKING FOR SOMETHING:

Feeling overwhelmed with what product to choose?

Don’t delay, give OIC a call and talk to us about your industrial application. Our aim is to help your business choose the right Elesa+Ganter element for the function you need. Whether you need to clamp, close, connect, control, level, manoeuvre, measure or set. OIC has an Elesa+Ganter machine element to fit your need.

We want to find out about your industrial application need and where we can help. Our contact details are below.

CONTACT US