Call us (Toll Free): AUS: 1300 506 505 NZ: 0800 944 788
Connect with us:
0

GN 753.1

Types

  • Type ZL: Cylindrical
  • Type KV: Convex

Identification no.

  • No. 1: With bore
  • No. 2: Stud with external thread
  • No. 3: Stud with internal thread

Outer race

Plastic, polyacetal (POM)

Operating temperature: -20 °C to 100 °C

Ball bearing

  • Steel, 100Cr6, hardened
  • Covered (cover disks 2Z)

Stud

Steel, zinc plated

Guide rollers GN 753.1 can be used as guides, bearings or supports for small to medium loads. They can also be used to create custom linear guide rail systems.

The radial load capacity rating given in the table should be understood as a guide value at which the guide rollers achieve a lifetime performance of at least 200,000 m. The conditions for achieving this lifetime performance are a speed of 0.4 m/s, a clean, dry, level, smooth and hard surface to roll against and an operating temperature between 15 °C and 30 °C. In general, the guide rollers should not be used under axial load.

  • Plastic Characteristics 

  • Application examples
 

LOOKING FOR SOMETHING:

Feeling overwhelmed with what product to choose?

Don’t delay, give OIC a call and talk to us about your industrial application. Our aim is to help your business choose the right Elesa+Ganter element for the function you need. Whether you need to clamp, close, connect, control, level, manoeuvre, measure or set. OIC has an Elesa+Ganter machine element to fit your need.

We want to find out about your industrial application need and where we can help. Our contact details are below.

CONTACT US