Call us (Toll Free): AUS: 1300 506 505 NZ: 0800 944 788
Connect with us:
0

GN 724.5

Types

  • Type C1: Chamfer, top
  • Type C2: Chamfer, bottom
  • Type C3: Chamfer, right
  • Type C4: Chamfer, left

Guide

  • Steel precision casting

Zinc plated, blue passivated ZB

Zinc plated and powder coated

Black, RAL 9005, textured finish SW

  • Stainless steel precision casting AISI CF-8 NI

Pull ring

  • Steel precision casting

Zinc plated, blue passivated (for ZB and SW)

  • Stainless steel precision casting AISI CF-8 (for NI)

Plunger pin

  • Steel, hardened

Zinc plated, blue passivated (for ZB and SW)

  • Stainless steel AISI 431, hardened (for NI)

Compression spring

Stainless steel AISI 316Ti

Indexing plungers GN 724.5 have a plunger pin with square cross-section, a latching surface on one side and a chamfer on the other. When the object to be secured moves towards the chamfer, the plunger pin is pushed back into the guide, allowing grooves and edges to pass over the pin. The plunger pin engages automatically in the direction of the latching surface.

The latching can be released by pulling the pull ring by hand or with a cable or pull rod using a hook. The types with rest position are used when the plunger pin should temporarily not protrude. For this purpose, the pull ring is turned sideways after the plunger pin has been retracted. The ring is held in this position by the catch recess at the top of the guide.

The dimensional tolerances between the pin and the guide have been chosen to ensure functional reliability even in roughly dimensioned applications or in the event of soiling.

There are several options for fastening. The hex mounting holes allow the use of socket cap screws DIN 912 and hex head screws or nuts according to DIN 931 or DIN 934.

  • Range of Indexing Plungers 
  • Stainless Steel Characteristics 

LOOKING FOR SOMETHING:

Feeling overwhelmed with what product to choose?

Don’t delay, give OIC a call and talk to us about your industrial application. Our aim is to help your business choose the right Elesa+Ganter element for the function you need. Whether you need to clamp, close, connect, control, level, manoeuvre, measure or set. OIC has an Elesa+Ganter machine element to fit your need.

We want to find out about your industrial application need and where we can help. Our contact details are below.

CONTACT US