Call us (Toll Free): AUS: 1300 506 505 NZ: 0800 944 788
Connect with us:
0

GN 713

Types

  • Type SA: Thrust pin steel, without seal
  • Type KA: Thrust pin plastic, without seal
  • Type SB: Thrust pin steel, with seal
  • Type KB: Thrust pin plastic, with seal

Housing

Steel

Zinc plated, blue passivated

Thrust pin

  • Steel for SA / SB
  • Hardened
  • Zinc plated, blue passivated
  • Plastic, Polyacetal (POM) for KA / KB

Thrust spring

  • Side thrust force light
  • Stainless steel AISI 301
  • Side thrust force medium
  • Spring steel blackened
  • Side thrust force heavy
  • Spring steel zinc plated, blue passivated

Seal

Chloroprene rubber (CR)

Spring loaded side thrust pins GN 713 are versatile and practical elements for holding, positioning and clamping workpieces.

They eliminate costly alternatives, are space saving and simple to install. The protruding height of the thrust pin can be adjusted with the threaded body.

For mounting the side thrust pins a suitable mounting tool GN 713.1 is available (see table).

  • GN 713.1 Mounting Tools (Code no. see table)

  • Plastic Characteristics 

 

The position of the mounting hole results from the workpiece length lm plus the hole offset m, which is calculated as shown below:

w = Maximum movement range of the thrust pin

t = Workpiece height

m = Hole offset

 

Case 1:

The workpiece height t is greater than the cone height l3

m = d1/2 - w/2

Case 2:

The workpiece height t is greater than the cone height l3

m = d1/2 - (l3-t) x 0,123

If the position of the mounting hole is determined as specified, the full movement of the side thrust pin will be available to cover the tolerance of the workpiece.

In case 1, the lateral clamping force is coupled with a downward pull that presses the workpiece against the contact surface.

 
 

The use of a mounting tool GN 715.1 or mounting tool GN 713.1 is recommended for installation.

Eccentric bushings GN 715.2 are an assembly aid for side thrust pins GN 714 / GN 715. They enable adjustment of the side thrust pins to the most favorable clamping position, e.g. to bridge larger tolerance ranges of a workpiece.

LOOKING FOR SOMETHING:

Feeling overwhelmed with what product to choose?

Don’t delay, give OIC a call and talk to us about your industrial application. Our aim is to help your business choose the right Elesa+Ganter element for the function you need. Whether you need to clamp, close, connect, control, level, manoeuvre, measure or set. OIC has an Elesa+Ganter machine element to fit your need.

We want to find out about your industrial application need and where we can help. Our contact details are below.

CONTACT US