Call us (Toll Free): AUS: 1300 506 505 NZ: 0800 944 788
Connect with us:
0

GN 5862

Hook

Steel, German Material No. 1.6540

  • high-tenisle tempered
  • 100% electro magnetic tensile tested to EN 1677
  • plastic coated, pink

Safety catch

Steel, German Material No. 1.6541

  • forged, high-tensile tempered
  • 100 % electro magnetic tensile tested

Bearing case

Steel 1.6541

  • forged, high-tensile tempered
  • 100 % electro magnetic tensile tested
  • zinc plated, blue passivated

Threaded stud

Steel, high-tensile tempered

Finish: Delta Tone

Load hooks GN 5862 rotate running in ball bearings. The freely rotating hook allows the bolts to hold loads in any allowed tensile direction.

The rated load-bearing capacity is shown clearly on the swivel eye bolt. It is valid for the most unfavourable case in term of the types of load listed opposite. Load rings GN 5862 comply with Mechanical Engineering Directive 2006 / 42 / EG and are BG tested.

The integrated RFID transponder clearly marks and identifies the sling and lifting gear, e.g. during the prescribed regular inspection.

  • Operating instructions GN 5862 -

  • Strength values of screws -
Method of mounting____logo__581k2______logo__581k3______logo__581k4______logo__581k5______logo__581k6______logo__581k7______logo__581k8______logo__581k9__
Number11222223 and 43 and 43 and 4
Angles of inclination0°90°0°90°0° to 45 °45° to 60°asymm.0° to 45°45° to 60°asymm.
Factor11221.4112.11.51
M 120.63 t0.63 t1.26 t1.26 t0.88 t0.63 t0.63 t1.32 t0.95 t0.63 t
M 161.50 t1.50 t3.00 t3.00 t2.10 t1.50 t1.50 t3.15 t2.25 t1.50 t
M 202.50 t2.50 t5.00 t5.00 t3.50 t2.50 t2.50 t5.25 t3.75 t2.50 t
M 244.00 t4.00 t8.00 t8.00 t5.60 t4.00 t4.00 t8.40 t6.00 t4.00 t
M 306.70 t5.00 t13.40 t10.00 t7.00 t5.00 t5.00 t10.50 t7.50 t5.00 t
M 3610.00 t8.00 t20.00 t16.00 t11.20 t8.00 t8.00 t16.80 t12.00 t8.00 t

The above load capacity table shows the maximum loads in metric tonnes as factor of the load ring type and at an operating temperature range of –40 °C to +200 °C, with a safety coefficient of 4 taken into account for all values.

The load hooks GN 5862 may be used only if it is bolted with the minimum screw-in depth which depends on the material and if the bolt contact surface is plane and fixed at a right angle to the tap hole.

If permanently mounted in place, the load hooks must rotate freely by 360° and must not rest on edges or other fixture, e.g. crane hooks. The load hooks are not suitable for permanent rotary movement under load exposure.

Operating instructions with more details and specifications are included with every delivery (see www.elesa-ganter.com)

 

  • other screw lengths l

LOOKING FOR SOMETHING:

Feeling overwhelmed with what product to choose?

Don’t delay, give OIC a call and talk to us about your industrial application. Our aim is to help your business choose the right Elesa+Ganter element for the function you need. Whether you need to clamp, close, connect, control, level, manoeuvre, measure or set. OIC has an Elesa+Ganter machine element to fit your need.

We want to find out about your industrial application need and where we can help. Our contact details are below.

CONTACT US