GN 5860

Chain ring

Steel, German Material No. 1.6540

  • high-tensile tempered
  • 100% electro magnetic tensile tested to EN 1677
  • plastic coated, pink

Eye ring

Steel, German Material No. 1.6541

  • forged
  • high-tensile tempered
  • 100 % electro magnetic tensile tested
  • plastic coated, pink

Bearing case

Steel, German Material No. 1.6541

  • forged
  • high-tensile tempered
  • 100 % electro magnetic tensile tested
  • zinc plated, blue passivated



Tensile strength class 10.9 (1000 N/mm2)

Finish: Delta Tone

Load rings GN 5860 rotate running in ball bearings. The freely rotating ring allows the bolts to hold loads in any tensile direction.

The rated load-bearing capacity is shown clearly on the swivel eye bolt. It is valid for the most unfavourable case in term of the types of load listed opposite. Load rings GN 5860 comply with Mechanical Engineering Directive 2006 / 42 / EG and are BG tested.

The integrated RFID transponder clearly marks and identifies the sling and lifting gear, e.g. during the prescribed regular inspection.

  • Operating instructions GN 5860 -

  • Strength values of screws 
Method of mounting____logo__581k2______logo__581k3______logo__581k4______logo__581k5______logo__581k6______logo__581k7______logo__581k8______logo__581k9__
Number11222223 and 43 and 43 and 4
Angles of inclination90°90°0° to 45 °45° to 60°asymm.0° to 45°45° to 60°asymm.
M 80.60 t0.30 t1.20 t0.60 t0.42 t0.30 t0.30 t0.63 t0.45 t0.30 t
M 100.90 t0.45 t1.80 t0.90 t0.63 t0.40 t0.40 t0.94 t0.67 t0.40 t
M 121.20 t0.60 t2.40 t1.20 t0.84 t0.60 t0.60 t1.26 t0.90 t0.60 t
M 162.60 t1.30 t5.20 t2.60 t1.82 t1.30 t1.30 t2.73 t1.95 t1.30 t
M 204.00 t2.00 t8.00 t4.00 t2.80 t2.00 t2.00 t4.25 t3.00 t2.00 t
M 247.00 t3.50 t14.00 t7.00 t4.90 t3.50 t3.50 t7.35 t5.25 t3.50 t
M 3010.00 t5.00 t20.00 t10.00 t7.00 t5.00 t5.00 t10.50 t7.50 t5.00 t

The above load capacity table shows the maximum loads in metric tonnes as factor of the load ring type and at an operating temperature range of –40 °C to +100 °C, with a safety coefficient of 4 taken into account for all values.

The load ring GN 5860 may be used only if it is bolted with the minimum screw-in depth which depends on the material and if the bolt contact surface is plane and fixed at a right angle to the tap hole.

If permanently mounted in place, the swivel eye bolt must rotate freely by 360° and must not rest on edges or other fixture, e.g. crane hooks. The load rings are not suitable for permanent rotary movement under load exposure.

Operating insctructions with more details and specification are included with every delivery (see


  • other screw length l


Feeling overwhelmed with what product to choose?

Don’t delay, give OIC a call and talk to us about your industrial application. Our aim is to help your business choose the right Elesa+Ganter element for the function you need. Whether you need to clamp, close, connect, control, level, manoeuvre, measure or set. OIC has an Elesa+Ganter machine element to fit your need.

We want to find out about your industrial application need and where we can help. Our contact details are below.