Call us (Toll Free): AUS: 1300 506 505 NZ: 0800 944 788
Connect with us:
0

GN 474.3

Types

  • Type K: With two hand levers and two socket cap screws
  • Type S: With four socket cap screws

Mounting clamp

Aluminum

  • Matte, ground MT
  • Anodized, black ELS

Adjustable hand levers (Type K)

  • Zinc die casting

Powder coated

Silver, RAL 9006, textured finish

  • Threaded insert and retaining screw

Stainless steel AISI 303

Adjusting wheel

Stainless steel AISI 303

Thrust washer

Plastic

Socket cap screws ISO 4762

Stainless steel AISI 304

  • 2x chemically blackened (Type S)
  • 2x plain finish (Type K / Type S)

Countersunk screw ISO 14581

Stainless steel AISI 304

Spring

Spring steel AISI 301

Parallel mounting clamps with adjustable spindle GN 474.3 are used for adjusting measuring or test setups.

For coarse adjustments in millimeters, two adjacent clamping points are released so that the rod can be shifted quickly. When using retaining rods / retaining tubes GN 480.1 in type LS with longitudinal scale, their scale provides orientation during presetting.

For fine adjustments, two diagonally opposite clamping points are released. The relative position of the retaining rods/retaining tubes can then be set with the adjusting wheel. The adjusting distance can be read in 0.1 mm increments based on the knurled graduations. Due to the integrated spring, the adjustment is free of backlash.

  • Stainless Steel Characteristics 

As delivered
____logo__474_3_MT-45746-0__
Clamping points invertedMovable mounting clamp, angular and clamping point invertedFixed mounting clamp, angular and clamping point inverted
____logo__474_3_MT-48937-0______logo__474_3_MT-48939-0______logo__474_3_MT-48941-0__

 

Line scaling on adjusting wheel for adjustment in 1/10 mm increments

 

LOOKING FOR SOMETHING:

Feeling overwhelmed with what product to choose?

Don’t delay, give OIC a call and talk to us about your industrial application. Our aim is to help your business choose the right Elesa+Ganter element for the function you need. Whether you need to clamp, close, connect, control, level, manoeuvre, measure or set. OIC has an Elesa+Ganter machine element to fit your need.

We want to find out about your industrial application need and where we can help. Our contact details are below.

CONTACT US