GN 43

Types (Base plate)

  • Type E0: without rubber underlay, with one slotted hole
  • Type E3: with rubber underlay, vulcanized, black, with one slotted hole
  • Type G0: without rubber underlay, with 2 slotted holes
  • Type G3: with rubber underlay, vulcanized, black, with 2 slotted holes

Versions of threaded stem

  • Version S: without nut, external hexagon at the bottom
  • Version SK: with nut, external hexagon at the bottom
  • Version T: without nut, wrench flat at the bottom
  • Version TK: with nut, wrench flat at the bottom
  • Version U: without nut, hexagon socket at the top and wrench flat at the bottom
  • Version UK: with nut, hexagon socket at the top and wrench flat at the bottom
  • Version V: without nut, external hexagon at the top and wrench flat at the bottom
  • Version VK: with nut, external hexagon at the top and wrench flat at the bottom
  • Version W: with adjustable sleeve, covered thread and wrench flat at the bottom
  • Version X: with female thread, external hexagon with female thread

Base plate

Stainless Steel

  • blank, ground
  • AISI 304 (A2)

Threaded stem

Stainless Steel AISI 303 (A1)

Hexagon nut ISO 4032

Stainless Steel, A2

Rubber pad, vulcanised

black, NBR (Perbunan®), 70 ± Shore A

GN 43 Stainless Steel-Levelling feet are for use in aggressive environments. The range of combinations of base plates and adjustable spindle versions allows these levelling feat to be used in every situation.

The levelling feet can be screwed to the mounting surface use the fixing lug, which prevents lateral shifting. Moreover, the types with the rubber underlay protect sensitive surfaces.

The levelling feet are supplied fully assembled and are not removable.

  • Stainless Steel characteristics 
  • Elastomer characteristics 

 

Information

The static load bearing capacity given in the table rests on a test series in which the load has been applied perpendicular to the base plate. For the values given in the table, the strain relief may result in minor deformations of the base plate.

Bending and buckling stress which often occurs in practice results in a lower load bearing capacity of the adjustment spindle and may have to be taken into account.

Also, the spindle strength is assumed to be ≥ 500 N/mm2.

The details given on strength are nonbinding guide values without any liability. In general, they do not constitute a warranty of quality.

The user must determine from case to case if a product is suitable for the intended purpose or use. Environmental factors may influence the stated values.

d1d2Static load in kN----
--Versions of threaded stem----
--S / SKT / TK and U / UKV / VKWX
80M 88---8
80M 1014---14
80M 1220---20
80M 16-20202020
80M 20-20202020
80M 24-222222-

LOOKING FOR SOMETHING:

Feeling overwhelmed with what product to choose?

Don’t delay, give OIC a call and talk to us about your industrial application. Our aim is to help your business choose the right Elesa+Ganter element for the function you need. Whether you need to clamp, close, connect, control, level, manoeuvre, measure or set. OIC has an Elesa+Ganter machine element to fit your need.

We want to find out about your industrial application need and where we can help. Our contact details are below.