Call us (Toll Free): AUS: 1300 506 505 NZ: 0800 944 788
Connect with us:
0

GN 426.5

Types

  • Type A: Mounting from the back (threaded blind bore)
  • Type B: Mounting from the operator‘s side

Handle

Stainless steel AISI 304

  • d1 = 20: Solid material
  • d1 = 28: Tube Ø 28 x 2
  • Matte shot-blasted

Threaded bushing / Mounting stud

Stainless steel AISI 303

Grub screw for type B

Stainless steel

  • d1 = 20: DIN 914-M5-6-NI
  • d1 = 28: DIN 914-M6-8-NI

Cabinet U-handles GN 426.5 can be mounted from the back (type A) as well as from the operator’s side (type B). In this case the stud is first screwed in from the machine side and then the handle is pushed on and secured with the grub screw.

Both mounting methods allow the mounting of a pair of handles in opposite position. This method could be used e.g. on doors (double handle). In general, a mounting stud with special length l2 might be required.

  • Load Rating Information 
  • Stainless Steel Characteristics 

LOOKING FOR SOMETHING:

Feeling overwhelmed with what product to choose?

Don’t delay, give OIC a call and talk to us about your industrial application. Our aim is to help your business choose the right Elesa+Ganter element for the function you need. Whether you need to clamp, close, connect, control, level, manoeuvre, measure or set. OIC has an Elesa+Ganter machine element to fit your need.

We want to find out about your industrial application need and where we can help. Our contact details are below.

CONTACT US