Call us (Toll Free): AUS: 1300 506 505 NZ: 0800 944 788
Connect with us:
0

GN 40

Types (Base plate)

  • Type A0: Without rubber pad
  • Type B0: Without rubber pad, with 2 mounting holes
  • Type A1: With rubber pad, clipped on, black
  • Type A3: With rubber pad, vulcanized, black

Version (Screw)

  • Version S: Without nut, external hex at the bottom
  • Version SK: With nut, external hex at the bottom
  • Version U: Without nut, hex socket at the top and wrench flat at the bottom
  • Version UK: With nut, hex socket at the top and wrench flat at the bottom
  • Version X: External hex with internal thread

Base plate

Steel, zinc plated, blue passivated

Threaded stem

Steel, zinc plated, blue passivated

Hex nut ISO 4032

Steel, zinc plated, blue passivated

Rubber pad

Clipped on

Black, TPE (Santoprene®)

≈ 80 Shore A

Rubber pad

Vulcanized

Black, NBR (Perbunan®)

70 ± 5 Shore A

Leveling feet GN 40 can be used in a host of combinations of base plates and adjustable spindle versions.

The base plate with the rubber pad protects sensitive surfaces and reduces lateral slippage. The type B0 can also be fastened to the mounting surface through two holes.

The leveling feet are supplied fully assembled and are not removable.

  • Plastic Characteristics 

 
d1--d2Static load Fs in kN--
GN 40GN 42GN 42-Versions of threaded stem--
-Drope shapeRectangular shape-S / SKU / UKX
40--M 87-7
40--M 107-7
40--M 127-7
40--M 16-77
5050-M 88-8
5050-M 108-8
5050-M 128-8
5050-M 16-88
6060-M 88-8
6060-M 1010-10
6060-M 1210-10
6060-M 16-1010
808080M 88-8
808080M 1010-10
808080M 1212-12
808080M 16-1212
808080M 20-1616
808080M 24-16-

The static load bearing capacity given in the table rests on a test series in which the load has been applied perpendicular to the base plate (without rubber underlay). For the values given in the table, the strain relief may result in minor deformations of the base plate.

Bending and buckling stress which often occurs in practice results in a lower load bearing capacity of the adjustment spindle and may have to be taken into account.

Also, the spindle strength is assumed to be ≥ 500 N/mm2.

The details given on strength are nonbinding guide values without any liability. In general, they do not constitute a warranty of quality.

The user must determine from case to case if a product is suitable for the intended purpose or use. Environmental factors may influence the stated values.

Versions of threaded stem
____logo__40_NA-22235-0______logo__40_NA-22237-0______logo__40_NA-22239-0__
S / SK: External hex at the bottom at d2 M 8, M 10, M 12U / UK: Hex socket at the top and wrench flat at the bottom at d2 M 16, M 20, M 24X: External hex with internal thread at d2 M 8, M 10, M 12, M 16, M 20

LOOKING FOR SOMETHING:

Feeling overwhelmed with what product to choose?

Don’t delay, give OIC a call and talk to us about your industrial application. Our aim is to help your business choose the right Elesa+Ganter element for the function you need. Whether you need to clamp, close, connect, control, level, manoeuvre, measure or set. OIC has an Elesa+Ganter machine element to fit your need.

We want to find out about your industrial application need and where we can help. Our contact details are below.

CONTACT US