GN 3380


  • Type T: for T-groove cylinder

Connection type

  • Connection type S: Plug



Cable (outer sheath)

Polyurethan PUR



Plastic, 3-pole

Knurled screw connection

  • Brass, nickel plated
  • Freely rotating

Temperature range: -30 °C to +80 °C

Protection class IP 65, IP 67

The sensor GN 3380 detects the piston position of pneumatic cylinders with magnetic pistons. Cylinders installed in pneumatic clamps enable the position detection of the clamp itself by means of this sensor. Upon reaching the switch point, the sensor electronics deliver a high signal, for instance to a machine controller, and also indicate this switch state via the integrated LED.

For installation, the sensor is inserted into the cylinder groove from above. The side retaining ribs prevent it from falling out. A quarter turn of the fastening screw quickly and reliably locks the sensor into place in the groove.

  • IP Protection classes 
  • Elastomer characteristics 

Error: Error%20%231085


Feeling overwhelmed with what product to choose?

Don’t delay, give OIC a call and talk to us about your industrial application. Our aim is to help your business choose the right Elesa+Ganter element for the function you need. Whether you need to clamp, close, connect, control, level, manoeuvre, measure or set. OIC has an Elesa+Ganter machine element to fit your need.

We want to find out about your industrial application need and where we can help. Our contact details are below.