GN 33

Type (Base plate)

  • Type B1: Matte shot-blasted, rubber inlaid, black

Version (Screw)

  • Version S: Without nut, external hex at the bottom
  • Version SK: With nut, external hex at the bottom
  • Version T: Without nut, wrench flat at the bottom
  • Version TK: With nut, wrench flat at the bottom
  • Version U: Without nut, hex socket at the top and wrench flat at the bottom
  • Version UK: With nut, hex socket at the top and wrench flat at the bottom
  • Version V: Without nut, external hex at the top and wrench flat at the bottom
  • Version VK: With nut, external hex at the top and wrench flat at the bottom
  • Version W: With adjustable sleeve, covered thread and wrench flat at the bottom
  • Version X: External hex with internal thread

Base plate / flange

Stainless steel AISI 304

Threaded stem

Stainless steel AISI 303

Hex nut ISO 4032

Stainless steel AISI 304

Rubber pad, inlaid

Black, NBR (Perbunan®)

80±5 Shore A

Stainless Steel-Levelling feet GN 33 will be delivered mounted and are not removable.

  • Elastomer Characteristics 
  • Stainless Steel Characteristics 

 

Information

The static load bearing capacity given in the table rests on a test series in which the load has been applied perpendicular to the base plate. For the values given in the table, the strain relief may result in minor deformations of the base plate.

Bending and buckling stress which often occurs in practice results in a lower load bearing capacity of the adjustment spindle and may have to be taken into account.

Also, the spindle strength is assumed to be ≥ 500 N/mm2.

The details given on strength are nonbinding guide values without any liability. In general, they do not constitute a warranty of quality.

The user must determine from case to case if a product is suitable for the intended purpose or use. Environmental factors may influence the stated values.

d1d2Static load in kN----
--Versions of threaded stem----
--S / SKT / TK and U / UKV / VKWX
--Rubber blackRubber blackRubber blackRubber blackRubber black
50M 88---8
50M 1014---13
50M 1220---20
50M 16-28--28
60M 88---8
60M 1014---13
60M 1220---20
60M 16-28272728
80M 88---8
80M 1014---13
80M 1219---15
80M 16-19242419
80M 20-19242419
80M 24-192424-
100M 88---8
100M 1014---13
100M 1217---17
100M 16-17212117
100M 20-17212117
100M 24-172121-
120M 20-25--25
120M 24-25---
120M 30-25---

Versions of threaded stem
____logo__31_NA-36617-0______logo__31_NA-36619-0______logo__31_NA-36621-0__
S / SK: External hex at the bottom at d2 M 8, M 10, M 12T / TK: Wrench flat at the bottom at d2 M 16, M 20, M 24, M 30U / UK: Hex socket at the top and wrench flat at the bottom at d2 M 16, M 20, M 24, M 30
____logo__31_NA-36623-0______logo__31_NA-36625-0______logo__31_NA-36615-0__
V / VK: External hex at the top and wrench flat at the bottom at d2 M 16, M 20, M 24W: Covered thread and wrench flat at the bottom at d2 M 16, M 20, M 24X: External hex with internal thread at d2 M 8, M 10, M 12, M 16, M 20

LOOKING FOR SOMETHING:

Feeling overwhelmed with what product to choose?

Don’t delay, give OIC a call and talk to us about your industrial application. Our aim is to help your business choose the right Elesa+Ganter element for the function you need. Whether you need to clamp, close, connect, control, level, manoeuvre, measure or set. OIC has an Elesa+Ganter machine element to fit your need.

We want to find out about your industrial application need and where we can help. Our contact details are below.