GN 119.3


  • Type DK: Operation with triangular spindle (DK7)
  • Type VK7: Operation with square spindle A/F7
  • Type VK8: Operation with square spindle A/F8
  • Type VDE: Operation with double bit

Cabinet "U" handle

Zinc die casting

plastic coated

black, RAL 9005, textured finish SW

silver, RAL 9006, textured finish SR

Cam latch

Sheet Steel

zinc plated, blue passivated

Distance piece


other parts


zinc plated, blue passivated

Latches with cabinet "U" handle GN 119.3 are used when the application requires both a locking mechanism and a handle.

The cabinet "U" handle with integrated lock is an attractively designed and cost-effective solution.

Latches GN 119.3 have a pulling-in range of 10 mm. Locking is achieved by turning the latch clockwise.

  • List of latch types 

  • Socket keys GN 119.2


By turning the latch clockwise the stepped cam latch moves up behind the door frame and pulls the door in.

The large pulling-in range of the cam (10 mm) allows these locks to be used successfully on doors with sealing strips. When selecting clamping range ‚A‘ the thickness of the door seal might have to be taken into consideration.

To fit the lock, the door will have to be provided with two holes as per sketch shown at a distance from the door frame to hole center of 23 mm.

The spigot (M22x1.5) has 4 surfaces, allowing the cabinet "U" handle also to be used with the standard bore holes of door latches GN 119.

The lock housing with the preassembled operating bolt is fitted into the hole from the front and held in position with the hexagon nut. The distance piece and the cam latch are then fitted at the rear and fixed with the hexagon nut.


Feeling overwhelmed with what product to choose?

Don’t delay, give OIC a call and talk to us about your industrial application. Our aim is to help your business choose the right Elesa+Ganter element for the function you need. Whether you need to clamp, close, connect, control, level, manoeuvre, measure or set. OIC has an Elesa+Ganter machine element to fit your need.

We want to find out about your industrial application need and where we can help. Our contact details are below.