GN 1050

Types

  • Type A: With threaded stud
  • Type I: With internal thread

Coding

  • F: Fixed bearing
  • L: Floating bearing

Housing

Aluminum

Black anodized ASS

Closure mechanism

Steel, tempered

Zinc plated, blue passivated

Fastening bushing (type I)

Stainless steel AISI 431

Tempered

Mounting screw (type A)

Socket cap screw DIN 7984

Property class 8.8

Other screws

Steel, zinc plated, blue passivated

Other parts

Stainless steel

Operating temperature -30 °C to 120 °C

Quick release couplings GN 1050 position and connect components without tools using studs GN 1050.1 for a tight and repeatable fit. For repeated machine set ups or assemblies that require the inconvenient use of a screwdriver, quick release couplings can be used on fixtures or production lines to efficiently mount guide rails, covers or additional devices.

A safety locking button protects against accidental opening of the coupling. When pressing the button, the sleeve can be moved axially to unlock a stud inserted into the notch on the inside. At the same time, a red ring becomes visible on the outside to indicate the unlocked state.

The couplings do not transmit any torque. If multiple couplings are used on the same unit, coding L can be used to compensate for a radial and axial offset. The bores d4 can hold cylinder or cam point pins to position the coupling, if needed. For coding L, the pin holes on the application must be proportionally larger to allow for radial adjustments.

Flanges GN 1050.2 are available as an accessory for the assembly of couplings and studs, and provide additional attachment options.

  • Studs GN 1050.1
  • Flanges GN 1050.2

  • Other colors (anodized) or plain

  • Stainless Steel characteristics 
  • Strength values of screws / nuts 

 
Nominal Sized2 Mounting thread Quick release couplingsd5 Mounting thread Studs GN 1050.1FZ Max. tensile load in kNFD Max. compressive load in kNFRMax. shear load in kN
2NM 10M 10252519
2NM 10M 12252519
2NM 12M 10252519
2NM 12M 12353528

Safety instructions:

The load capacities can only be achieved if the surrounding structure is capable of supporting these loads.

Any threaded holes on the application or inserted nuts and screws require at least property class 8.

Depending on the application, additional safety factors should be added.

 

LOOKING FOR SOMETHING:

Feeling overwhelmed with what product to choose?

Don’t delay, give OIC a call and talk to us about your industrial application. Our aim is to help your business choose the right Elesa+Ganter element for the function you need. Whether you need to clamp, close, connect, control, level, manoeuvre, measure or set. OIC has an Elesa+Ganter machine element to fit your need.

We want to find out about your industrial application need and where we can help. Our contact details are below.