Call us (Toll Free): AUS: 1300 506 505 NZ: 0800 944 788
Connect with us:
0

DIN 582

Steel C 15 E ST

  • Drop-forged
  • Annealed
  • Contact face machined
  • Zinc plated, blue passivated

Stainless steel NI

  • Drop-forged
  • Contact face machined

Stainless steel A4

  • Drop-forged
    • Contact face machined

The following guidelines of the lifting eye nuts DIN 582 have to be observed in addition to the load values given in the above table.

The eye nut must be of fully screwd in to achieve a perfect contact between the two mating faces.

Both threads must be of a equal length and the base material of equal strength to that of the nut.

The operating instructions also contain further important information and notes. It is part of the scope of delivery and can be downloaded as a PDF.

The official DIN standard sheet specifies the additional sizes M42, M48, M56, M64, M72x6, M80x6 and M100x6.

  • Operating instruction DIN 582 

LOOKING FOR SOMETHING:

Feeling overwhelmed with what product to choose?

Don’t delay, give OIC a call and talk to us about your industrial application. Our aim is to help your business choose the right Elesa+Ganter element for the function you need. Whether you need to clamp, close, connect, control, level, manoeuvre, measure or set. OIC has an Elesa+Ganter machine element to fit your need.

We want to find out about your industrial application need and where we can help. Our contact details are below.

CONTACT US