Call us (Toll Free): AUS: 1300 506 505 NZ: 0800 944 788
Connect with us:
0

DIN 319

Version in Plastic

Types

  • Type C: With tapped hole (no bushing)
  • Type E: With tapped bushing

Plastic KU

Duroplast (Phenolic PF)

  • Flash removed and polished finish
  • Black (standard color)
  • Red RT, similar RAL 3003: add RT on order code

Bushing (Type E)

  • Steel, zinc plated (standard version)
  • Brass MS add MS on order code (only in black version)

Plastic KT

Technopolymer (Polyamide PA)

  • Shock resistant
  • Black, matte finish (standard color)
  • Red RT, similar RAL 3003: add RT on order code

Bushing (Type E)

Steel, zinc plated

Version in Steel

Types

  • Type C: With tapped hole
  • Type K: With plain hole H7

Steel ST

Polished

Version in Aluminium

Types

  • Type C: With tapped hole
  • Type K: With plain hole H7

Aluminium AL

Polished

Version in Stainless Steel

Types

  • Type C: With tapped hole
  • Type K: With plain hole H7

Stainless Steel AISI 303 NI

Matte shot-blasted

Version in Plastic (Press on type)

Types

  • Type L: With tolerance ring
  • Type M: With tapered bore

Type L

Plastic KU

Duroplast (Phenolic PF)

Black, shiny finish

Tolerance ring

Spring steel

Type M

Plastic KT

Technopolymer (Polyamide PA)

  • Shock resistant
  • Black, matte finish

When ball knobs DIN 319 (Press on type) type L and M are used the shaft does not require a thread.

During mounting, easy blows with a soft hammer are sufficient to drive the knob into place, the shaft end should be slightly rounded or chamfered (30°).

Before the assembly of the knobs, type L the tolerance ring is to be inserted into the drilling. Further it is to be noted that the button is put on perpendicular and / or axially parallel. Otherwise the knob may break.

Ball knobs, type M are a more economic solution.

Ball knobs DIN 319 in sizes 30 and 35, as well as various thread of type C and ball knobs made of technopolymer (KT) are not on the official DIN standard sheet.

Ball knobs DIN 319 made ​​of steel, aluminum and stainless steel are not on the official DIN standard sheet.

  • Red version

  • ISO-Fundamental Tolerances 
  • Stainless Steel characteristics 
  • Plastic characteristics - Duroplast
  • Plastic characteristics - Technopolymer

LOOKING FOR SOMETHING:

Feeling overwhelmed with what product to choose?

Don’t delay, give OIC a call and talk to us about your industrial application. Our aim is to help your business choose the right Elesa+Ganter element for the function you need. Whether you need to clamp, close, connect, control, level, manoeuvre, measure or set. OIC has an Elesa+Ganter machine element to fit your need.

We want to find out about your industrial application need and where we can help. Our contact details are below.

CONTACT US