CFP.

Material

Acetal resin based (POM) technopolymer, black colour, matte finish.

Rotating pin

Acetal based (POM) technopolymer, black colour.

Screw-covers

Polyester based (PBT) technopolymer, black colour, matte finish, snap-in assembly.

Standard executions

  • CFP-SH: pass-through holes for countersunk head screws.
  • CFP-CH: pass-through holes for cylindrical head screws.
  • CFP-EH: pass-through holes for hexagonal head screws.

Rotation angle (approximate value)

  • Max 195° (-15° and +180° being 0° the condition where the interconnected surfaces are on the same plane).
  • Do not exceed the rotation angle limit so as not to prejudice the hinge mechanical performance.
  • This hinge can be used combined with the hinge type CFQ. with the same design, without detent position.
  • The detent device (ELESA patent) allows four different detent positions of the door (0°, +80°, +120°, +170°).
  • To choose the convenient type and the right number of hinges for your application, see the Guidelines.

Resistant torque

All detent positions guarantee a resistant torque of about 1.1 Nm (which is the torque that must be applied to free the detent device of the hinge).

The hinge had been tested with more than 10.000 opening and closing cycles and the value of the resistant torque was unchanged.

 
 
 
Resistance tests
AXIAL STRESSRADIAL STRESS80° and 90° ANGLED STRESS120° ANGLED STRESS170° ANGLED STRESSResistant torque
____logo__CFP_S_AXIAL______logo__CFP_S_RADIAL______logo__CFP_S_80_90______logo__CFP_S_120______logo__CFP_S_170______logo__CFP_CR__
Maximum working load
Ea [N]
Load at breakage
Ra [N]
Maximum working load
Er [N]
Load at breakage
Rr [N]
Maximum working load
E80 e E90 [N]
Load at breakage
R80 e R90 [N]
Maximum working load
E120 [N]
Load at breakage
R120 [N]
Maximum working load
E170 [N]
Load at breakage
R170 [N]
[Nm]
3001220350197034562028585540014101.1

LOOKING FOR SOMETHING:

Feeling overwhelmed with what product to choose?

Don’t delay, give OIC a call and talk to us about your industrial application. Our aim is to help your business choose the right Elesa+Ganter element for the function you need. Whether you need to clamp, close, connect, control, level, manoeuvre, measure or set. OIC has an Elesa+Ganter machine element to fit your need.

We want to find out about your industrial application need and where we can help. Our contact details are below.