Glass-fibre reinforced polyamide (PA) SUPER-technopolymer body, black colour, matte finish.

Rotating pin


Pin housing end caps made out of acetal based (POM) technopolymer, black colour.

Return spring

Stainless steel.

Standard executions

Pass-through holes for M6 cylindrical head screws.

  • CFMR-NC-020: max return torque 0.20Nm (at 180°), holding torque 0.07Nm (at 0°).
  • CFMR-NC-035: max return torque 0.35Nm (at 180°), holding torque 0.12Nm (at 0°).
  • CFMR-NC-070: max return torque 0.70Nm (at 180°), holding torque 0.25Nm (at 0°).
  • CFMR-NO-020: max return torque 0.20Nm (at 0°), holding torque 0.07Nm (at 180°)
  • CFMR-NO-035: max return torque 0.35Nm (at 0°), holding torque 0.12Nm (at 180°).
  • CFMR-NO-070: max return torque 0.70Nm (at 0°), holding torque 0.25Nm (at 180°).
  • CFMR-NS: complementary hinge, no return spring.

Rotation angle (approximate value)

Max 270° (-90° and +180° being 0° the condition where the two interconnected surfaces are on the same plane).

The hinge can reach -90 ° but this condition must not be used for CFMR-NO execution.

Do not exceed the rotation limit angle so as not to prejudice the correct operation of the return spring.

To choose the convenient type and the right number of hinges for your application, see the Guidelines.

Features and performances

CFMR hinge is used for the automatic re-closing or re-opening of the door by the return spring.

The torque varies progressively with the opening/closing angle of the hinge.

In special stress resistance tests, the return spring has exceeded 100,000 cycles while keeping the torque values unchanged.

DescriptionMax limit static load
Sa [N]
Max limit static load
Sr [N]
Max limit static load
S90 [N]

The max static load is the value above which the material may break thus prejudicing the hinge functionality. Obviously, a suitable factor, according to the importance and the safety level of the specific application must be applied to this value.


Feeling overwhelmed with what product to choose?

Don’t delay, give OIC a call and talk to us about your industrial application. Our aim is to help your business choose the right Elesa+Ganter element for the function you need. Whether you need to clamp, close, connect, control, level, manoeuvre, measure or set. OIC has an Elesa+Ganter machine element to fit your need.

We want to find out about your industrial application need and where we can help. Our contact details are below.