Call us (Toll Free): AUS: 1300 506 505 NZ: 0800 944 788
Connect with us:
0

GN 22

Type (Base plate)

  • Type D0: Fine turned, without rubber underlay
  • Type D1: Fine turned, with rubber underlay, inlaid, black

Versions of threaded stem

  • Version S: Without nut, external hex at the bottom
  • Version SK: With nut, external hex at the bottom
  • Version T: Without nut, wrench flat at the bottom
  • Version TK: With nut, wrench flat at the bottom

Base plate

Stainless steel AISI 316L

Threaded stem

Stainless steel AISI 316L

Hex nuts ISO 4032

Stainless steel

Mounting screw

Stainless steel

Rubber underlay

Acrylonitrile butadiene rubber (NBR)

  • Black
  • Hardness 70 Shore A
  • Inserted

Leveling feet GN 22 are particularly suitable for use in aggressive environments.

The leveling feet are supplied assembled and cannot be disassembled.

  • Plastic Characteristics 
  • Stainless Steel Characteristics 

 
d1d2Static load in kN
--Versions of threaded stem
--S / SKT / TK and U / UKV / VKWX
80M 86---17
80M 1011---17
80M 1216---17
80M 16-17212517
80M 20-28353528
80M 24-465252-
100M 86---17
100M 1011---17
100M 1216---17
100M 16-17212517
100M 20-28353528
100M 24-465252-
120M 20-28--28
120M 24-46---
120M 30-43---

At a spindle thread size M 10 and higher, the static load of the leveling feet GN 21 / GN 22 / GN 23 / GN 24 is limited owing to the permissible contact pressure of the adjustment spindle acting on the base plate (at a spindle strength ≥ 500 N/mm2). The values given in the table (valid for type D0 without rubber underlay) assume a clean pressure load perpendicular to the base plate. Bending and buckling stress which often occurs in practice results in a lower load-bearing capacity of the adjustment spindle and may have to be taken into account.

The details given on strength are non-binding guide values without any liability. In general, they do not constitute a warranty or quality.

The user must determine from case to case if a product is suitable for the intended purpose or use. Environmental factors may influence the stated values.

Versions of threaded stem
____logo__21_NA-33635-0______logo__21_NA-33639-0__
S: Without nutT: Without nut
SK: With nutTK: With nut
External hex at the bottom at d2 M 8, M 10, M 12Wrench flat at the bottom d2 M 16, M 20, M 24, M 30

LOOKING FOR SOMETHING:

Feeling overwhelmed with what product to choose?

Don’t delay, give OIC a call and talk to us about your industrial application. Our aim is to help your business choose the right Elesa+Ganter element for the function you need. Whether you need to clamp, close, connect, control, level, manoeuvre, measure or set. OIC has an Elesa+Ganter machine element to fit your need.

We want to find out about your industrial application need and where we can help. Our contact details are below.

CONTACT US