Call us (Toll Free): AUS: 1300 506 505 NZ: 0800 944 788
Connect with us:
0

EBP-CH

Handles with latch

Technopolymer

EBP-CH-A

Handles with latch
Two-wing groove

EBP-CH-T

Handles with latch
Triangular groove

EBP-CH-A

Handles with latch
Two-wing groove

Handle

Glass-fibre reinforced polyamide based (PA) technopolymer, grey-black colour, matte finish.

Lock

  • Glass-fibre reinforced polyamide-based (PA) technopolymer rotor, grey-black colour, matte finish. NBR rubber O-Ring.
  • Brass stator M22x1,5.
  • Zinc alloy locking nut M22x1,5.
  • Zinc alloy shaped closing lever, thickness = 4 mm.
  • Zinc-plated steel toothed washer.
  • Zinc-plated steel self-tapping screw.

Key

Polyamide based (PA) technopolymer, grey-black colour, matte finish.

Standard execution

Brass boss, threaded blind hole.

  • EBP-CH-T: triangular groove for key.
  • EBP-CH-A: two-wing groove for key.

Rotation

90°.

 

Technical data

Tensile stress and impact strength: the values F1, F2, L1 and L2 indicated in the table were obtained during breaking tests carried out with the appropriate dynamometric equipment under the test conditions shown in the figure with ambient temperature.

The value F3 shown in the table represents the load under traction in the closed condition of the handle.

 

Assembly instructions

  1. Drill the holes in the door following the supplied template.
  2. Fit the handle.
  3. Screw the nut on the stator and the screw in the tapped boss to secure the handle to the door.
  4. Fit the rotor into the handle seat.
  5. Fix the lever to the end of the rotor by means of a washer and a threaded screw.
 

LOOKING FOR SOMETHING:

Feeling overwhelmed with what product to choose?

Don’t delay, give OIC a call and talk to us about your industrial application. Our aim is to help your business choose the right Elesa+Ganter element for the function you need. Whether you need to clamp, close, connect, control, level, manoeuvre, measure or set. OIC has an Elesa+Ganter machine element to fit your need.

We want to find out about your industrial application need and where we can help. Our contact details are below.

CONTACT US