Call us (Toll Free): AUS: 1300 506 505 NZ: 0800 944 788
Connect with us:
0

GN 114.8

Locking Pins

Pin Stainless Steel, T-Handle Plastic, with Axial Lock (Pawl)

GN 114.8

Locking Pins
Locking Pins

GN 114.8

Locking Pins
Locking Pins

Pin

Stainless steel AISI 303

Pawl

Stainless steel sheet metal AISI 304

T-handle

Plastic, polyamide (PA)

  • Black
  • Operating temperature up to +80 °C
  • Bushing
  • Stainless steel AISI 303

Push button / Slide

Plastic, polyacetal (POM)

  • Push button: red
  • Operating temperature up to +80 °C

Compression spring

Stainless steel AISI 302

Locking pins GN 114.8 with axial lock are used to quickly fix, connect and secure various components. Typically, they are used as bearing bolts that have to be frequently assembled and disassembled.

The rectangular pawls made of stainless steel sheet metal hold the locking pin in an axial position in the bore. They are retracted with the push button and when released, the compression spring returns them to the locked position. The pawls are not aligned with the T-handle.

The technical annex contains the load ratings for the double shear strength (breaking strength).

 

Information

The load capacities specified in the table for the double sided shearing resistance (breaking strength) have been calculated or theoretically defined on the basis of DIN 50141.

At the same time, the endangered bolt cross-section S, according to a nearby sketch, was considered in two shear planes before breakage.

The details given on load rating are non-binding guide values without any liability. In general, they do not constitute a warranty of condition.

The user must determine whether the product is suitable for the intended purpose. Environmental factors can influence the specified values.

An appropriate safety factor must be taken into account in the design.

Load capacity F in kN ≈ double sided shearing resistance acc. DIN 50141 (breaking strength)

LOOKING FOR ALUMINIUM PROFILES:

Feeling overwhelmed with what product to choose?

Don’t delay, give OIC a call and talk to us about your industrial application. Our aim is to help your business choose the right Elesa+Ganter element for the function you need. Whether you need to clamp, close, connect, control, level, manoeuvre, measure or set. OIC has an Elesa+Ganter machine element to fit your need.

We want to find out about your industrial application need and where we can help. Our contact details are below.

CONTACT US